"From The Anvil" Handmade Solid Cast Black Octagonal Mortice/Rim Knob Set
Supplied complete with two loose roses to enable them to be used with a Rim or Mortice Lock, two octagonal knobs, two standard profile escutcheons, a threaded spindle for various door thicknesses (up to 60mm) and fixing screws.
As these knobs are unsprung, we recommend you use a Heavy Duty Tubular Latch or a Lockset.
The knob can be used as a door pull, drawer knob or cupboard knob by using with a Threaded Taylors Spindle 90243.
Powder Coated Black
Size: 2.25 inch x 2.5 inch
Rose diameter: 2.375 inch (2 3/8")
These mortise /rim knobs come unsprung. They are solid cast not hollow and have loose roses to enable them to be used with a rim lock (discard one rose) or with a mortice lock.
These knobs have threaded spindles to take the adjustment for various door thicknesses and lock firmly with a grub screw. Each set comes complete with fixing screws, which are concealed for improved appearance, together with two escutcheons.For best results the centre of the knob should be a minimum of 3'' from the edge of the door. Heavy duty latches and locks are recommended for maximum efficiency - see codes 18299/4'' or 18238/5''. Please note that all the knobs with this traditional black finish range can be used externally.
Sold as a set and supplied with necessary fixing screws. The GRUB SCREW should locate on the ''V'' in the shaft and not on the threaded part.