Save 25%
'From The Anvil' Handmade Solid Cast Pewter Round Mortice/Rim Knob Set
Supplied complete with two loose roses to enable them to be used with a Rim or Mortice Lock, two octagonal knobs, two standard profile escutcheons, a threaded spindle for various door thicknesses (up to 60mm) and fixing screws.
As these knobs are unsprung, we recommend you use a Heavy Duty Tubular Latch or a Lockset.
The knob can be used as a door pull, drawer knob or cupboard knob by using with a Threaded Taylor's Spindle 31298/A.
Finish
Pewter Patina
Dimensions
Knob Size: 1 5/8" (41mm)
Projection: 2 3/4" (70mm)
Rose Size: 2 3/8" (60mm)
Spindle Size: 8mm (Threaded)
These mortise /rim knobs come unsprung. They are solid cast not hollow and have loose roses to enable them to be used with a rim lock (discard one rose) or with a mortice lock.
These knobs have threaded spindles to take the adjustment for various door thicknesses and lock firmly with a grub screw. Each set comes complete with fixing screws, which are concealed for improved appearance, together with two escutcheons.For best results the centre of the knob should be a minimum of 3'' from the edge of the door. Heavy duty latches and locks are recommended for maximum efficiency - see codes 18299/4'' or 18238/5''. Please note that all the knobs with this traditional black finish range can be used externally.
Sold as a set and supplied with necessary fixing screws. The GRUB SCREW should locate on the ''V'' in the shaft and not on the threaded part.
Supplied complete with two loose roses to enable them to be used with a Rim or Mortice Lock, two octagonal knobs, two standard profile escutcheons, a threaded spindle for various door thicknesses (up to 60mm) and fixing screws.
As these knobs are unsprung, we recommend you use a Heavy Duty Tubular Latch or a Lockset.
The knob can be used as a door pull, drawer knob or cupboard knob by using with a Threaded Taylor's Spindle 31298/A.
Finish
Pewter Patina
Dimensions
Knob Size: 1 5/8" (41mm)
Projection: 2 3/4" (70mm)
Rose Size: 2 3/8" (60mm)
Spindle Size: 8mm (Threaded)
These mortise /rim knobs come unsprung. They are solid cast not hollow and have loose roses to enable them to be used with a rim lock (discard one rose) or with a mortice lock.
These knobs have threaded spindles to take the adjustment for various door thicknesses and lock firmly with a grub screw. Each set comes complete with fixing screws, which are concealed for improved appearance, together with two escutcheons.For best results the centre of the knob should be a minimum of 3'' from the edge of the door. Heavy duty latches and locks are recommended for maximum efficiency - see codes 18299/4'' or 18238/5''. Please note that all the knobs with this traditional black finish range can be used externally.
Sold as a set and supplied with necessary fixing screws. The GRUB SCREW should locate on the ''V'' in the shaft and not on the threaded part.
Brand:
From The Anvil
GTIN:
5060282104273
MPN:
33778