"From The Anvil" Handmade Solid Cast Black Large Octagonal Mortice/Rim Knob Set
As these knobs are unsprung, we recommend you use a Heavy Duty Tubular Latch or a Lockset.
The knob can be used as a door pull, drawer knob or cupboard knob by using with a Threaded Taylors Spindle 31298/A.
Powder Coat Black
Knob Size: 70mm
Rose Size: 87mm
Spindle Size: 8mm (Threaded)
These mortise /rim knobs come unsprung. They are solid cast not hollow and have loose roses to enable them to be used with a rim lock (discard one rose) or with a mortice lock.
These knobs have threaded spindles to take the adjustment for various door thicknesses and lock firmly with a grub screw. Each set comes complete with fixing screws, which are concealed for improved appearance, together with two escutcheons.For best results the centre of the knob should be a minimum of 3'' from the edge of the door. Heavy duty latches and locks are recommended for maximum efficiency - see codes 18299/4'' or 18238/5''.
Sold as a set and supplied with necessary fixing screws. The GRUB SCREW should locate on the ''V'' in the shaft and not on the threaded part.