Code Plates ONLY For use with existing mortice latch or lock. Back to Back version.
The existing lock must have a fixing hole (22mm) below follower (spindle).
- Internal doors and External doors
- Front and Back Plates only for use with existing mortice latch or lock
- Lever handle lock for doors hung on the left or right
- Available in Stainless Steel only
- Panic device access kit available CL500PK Stainless Steel finish only
- Use in offices / schools / warehouses / hospitals / care homes / nurseries / hotels / leisure facilities / the home
Available in one PVD Finish
Lever or Knob handle
Ideal lock for the following types of door:
Garage-to-house doors, Inner doors, Gates
Suitable for HIGH traffic.
CL500 BB stainless steel lock available with either lever or knob handle.
The CL500 BB coded plates are supplied with a random code commencing with the C clear button. To change the code after fitting, the lock must first be removed from the door. The code is non sequential, that is the code can be entered in any order e.g. 1234 can be 4321 or 1342 or whatever is the most convenient sequence. With the 11 buttons a total of 2,047 different codes are available, any of which may be entered in any order.
IMPORTANT: When using CL500BB front and back plates only, please test with your selected lock-case to ensure that the latch retracts fully from the code side without too much resistance. Some lock-cases have a heavily sprung latch follower designed for use with un-sprung lever furniture. This heavy springing can defeat the clutch on our locks.
If in doubt do not specify one of our locks with a lock-case that is designed for use with un-sprung lever furniture.
Please note the code chamber for mechanical locks requires the lever to be rotated at least 45 degrees to re-set the lock for the next code user.
Please contact Codelocks technical department if you are unsure. Housegoblin and Codelocks Limited does not accept responsibility for products incorrectly specified.